LARKEN CAMTOOL 24/24R
Precision CNC Router / Engraver
|
 |
The Camtool 24/24R comes standard with a 2 Hp Bosch Variable Speed Router with optional 2hp Perske or 3hp Elte router and a Floating Engraving spindle.
Prices start under $10500 ($Can)
Click for a Price Quote
All systems come complete and ready to run with Lcam software, 3 axis controller, dust pickup ,hold-down clamps and manual
Precision Quality Construction
Precision Thompson Linear bearings are on all
axes. These recirculating ball bearings are extremely accurate and rugged.
They guarantee very accurate reliable positioning and excellent cut quality.
The hardened rails are bolted to the frame all along their length.
The table and frame are made of solid aluminum plate and bar that has
been precision machined. We don't use hollow aluminum extrusions like
other xyz tables.
A Profitable Investment
The possibilities for profit and new products are limited only by your imagination. The Camtool can be used for so many different types of jobs it can pay for itself in a very short time.The Camtool can be used to Route, Engrave, 3D mill or plot all types of materials including plastic, acrylic, MDF, wood, composites, brass and aluminium. A 2 hp router variable speed Bosch router is standard with an optional precision floating spindle.
Perfect for Complex Graphics
With the Camtool you can easily do complex jobs that you would have previously thought too difficult or time consuming, such as inlaying metal into wood or cutting out elaborate graphic shapes .
|
Advanced contouring at cutting speeds up to 120 in/min lets you cut complex graphics with curves and arcs smoothly and accurately. With its computer controlled 4" z axis clearance and 5" stroke , the Camtool can cut thick materials such as wood or foam board using the multi-pass mode. With our StarCam Windows controller you can specify maximum depth per pass, whether or not you require a finish pass, cutting speed and finish pass speed. The Camtool can engrave tiny letters smaller than .050" or cut signs 24" wide by any length in long sign mode |
 |
CAMTOOL 24/24 Specifications |
|
| XYZ travel | 24.5" x 24.5" x 5" |
| Z Clearance | 4" (optional 8") |
| XYZ Resolution | 0.0005" |
| Repeatability | + - 0.001" |
| Spindle type | 2 Hp Bosch Variable speed router (std) |
| Maximum cutting speed | 120 in/min (240 in/min servo) |
| Control type | Micro-Step Stepper motor 150 oz/in ( Optional 3 axis Servo controller ) |
| Table Material | Aluminum drilled and tapped plate (.375") |
| T-Slot option | .Machined 1/2" x 2" Solid aluminum bar |
| Shipping weight | 210 Lb (100KG) |
| XYZ table top space | 30" x 38" |
| Power required | 120 volt 15 amps |
| Computer required | Pentium 100 minimum |
Camtool 24/24 Options |
|---|
| T-Slot Aluminium Table |
| 8" Z axis clearance (9" Travel) |
| 2 Hp Perske router with Drive unit (220V) |
| 3 Hp Elte router with Drive unit (220V) |
| Floating 1/4" engraving spindle (1/10 Hp) |
| Plotter-Pen/Knife holder |
| Vinyl cutting knife w/blade |
| 3D digitizer probe Attachment |
| High performance Servo motors |
| Surfer 3D toolpath software |
